6' Commercial Parking Block

Plastic Commercial Parking Blocks

This 6-foot long high-quality plastic parking block is light weight, durable, and made from high-quality recycled plastic using an injection mold process. Installation is easy, in fact, it can be handled and installed by one person with ease-- no need to ask for help. Because Commercial Parking Blocks are made of recycled plastic they are also LEED qualified by the United States Green Building Council.

Since it's 100% HDPE recycled plastic, rest assured that it's environmentally friendly and can withstand sudden changes in temperature. As for the color, no need to worry about fading-- it's molded all throughout that means upkeep won't even be necessary at all.

Perfect for apartment buildings, shopping malls, commercial grounds, condominiums, and anywhere with a parking lot. We also offer parking blocks in high-visibility yellow, white, traditional gray, and handicapped blue. With every purchase, you'll also be getting the mounting hardware included with your purchase, and it also features recessed bolt holes.

Our portable plastic parking blocks are one of the best parking curb wheel stops available in the market. With superior strength and durability, but substantially lighter than your conventional concrete block. Thus, no need to look for another person to help you set this up.

Engineered For Performance & Reliability

The Traffic Safety Store sells Portable Plastic Blocks made using 100% recycled plastics that are a combination of post-industrial and post consumer.

If you're looking for something with a thinner base and height, then the Standard model would probably meet your criteria. We also have the small variation often used in mall parking lots because of its short profile. It's perfect for areas where lower vehicles are usually present, as it could lessen the chances of impacts with bumpers, as well as with license plates. The tires would be able to roll up to the block.

Plastic Commercial Parking Block Installation Methods

Lag Method

There are several ways on how you can install this parking block, and one of which is the lag method.

What You'll Need:

• (1) 1/2” x 8” lag bolt to be placed in each hole
• (2) 1/2” washers for each bolt
• (1) 1/2” lag shield anchor for each bolt
• Hammer
• High speed hammer drill with 3/4” masonry bit
• Impact wrench

Begin by positioning the parking block in the area where it's supposed to be installed. Using the pre-drilled holes as a guide, mark the location of each hole on the surface. Then, remove the parking block. With a high-speed hammer drill, drill a hole at the marked spots, with a depth of around 6” below the surface.

A lag shield anchor should be inserted in each hole, where a large anchor should be used on the opening top. Using a hammer, tap the anchor into the hole so that it would flush into the surface. The washer should be placed over each anchor hole after.

Once completed, reposition the parking block in the area where it's going to be installed. Slip a washer onto the bold, then insert the bolt through a pre-drilled hole. It should be around three quarters of the way, and maintain a 3/4” socket. This should be repeated on the remaining holes, and don't forget to tighten each bolt until it's snug.

Steel Spike Method

Another method you can try is the steel spike method.

What You'll Need:

• (1) 1/2” x 12” plated steel spike to be used on each hole of the parking block
• Sledge hammer
• Hammer drill with 3/8” masonry bit

Similar to the lag method, you'll begin by placing the parking block in the area where it's going to be installed. Then, using its pre-drilled holes as a guide, mark the location on the surface.

Remove the block, and drill a hole at each marked location using a 3/8” masonry bit. This would ensure that the asphalt won't get fractured during the process.

Place the parking block in the original position and insert the spike through the pre-drilled hole, until it's snug.

The Leading Supplier Of Plastic Commercial Parking Block

With so many industrial and commercial applications for Plastic Commercial Parking Block, it can be difficult to understand the type of Plastic Commercial Parking Block you need for your project. The Traffic Safety Store has years of experience helping customers just like you choose the perfect Plastic Commercial Parking Block for any project or application.

Give our trusted experts a call when you are ready to find the traffic safety supplies you need. Our team will work with you to find the best solutions to your problem, and our commitment to speedy delivery will have your traffic safety products delivered to you in no time. Contact us today to learn more!