6' Low-Profile Rubber Parking Block
6 ft low profile rubber parking block with hardware 12 inch galvanized steel spikes asphalt or gravel
Item #:PBRLP6YS
On Sale
You save 17% regardless of quantity
In Stock - Ships On Monday- $38.35
$46.30
$38.35
$41.95
Save
17%$38.35
Quantity
1-24Quantity
25-49Quantity
50+ Quick Facts:
- 70" long x 5" wide at base x 3 1/2" tall
- Approx. 19 lbs each
- Mounting Hardware Included
- Three (3) High Visibility Yellow Panels per side
- In Stock - Ships On Monday
Volume Pricing:
Quantity
1-24Quantity
25-49Quantity
50+![regular price]()
$46.30
$38.35![regular price]()
$41.95
$38.35$38.35
Share
- 70" long x 5" wide at base x 3 1/2" tall
- Includes Hardware for Mounting
- 19 lbs of 100% recycled rubber each
- Three (3) High Visibility Yellow Panels per side
Our Best Value in a Rubber Parking Block the Low-Profile Parking Block. Weighing 19 lbs each they are sturdy and durable but easily carried and installed by one person. These Rubber Wheel Stops are made from Durable Masticated Rubber Compound consisting of approximately 65% pre-consumer recycled rubber and 35% post-consumer recycled rubber. This parking block will flex slightly to lie flat on uneven or cracked surfaces. Low Profile Rubber Parking Blocks have 4 counter-sunk mounting holes per block and all installation hardware is included.
Have questions about parking blocks? Call our friendly customer service team at 800-429-9030 for expert advice. With over 25 years of experience, Traffic Safety Store is your trusted source for parking block projects and installations!
![]()
9/27/2024Everything was exactly as expected
Jennifer Jordan, Saint Clair MI
![]()
1/22/2024I purchased two and placed them in the garage under my two vehicles. So far, they work great. I do not have to bolt them on the floor at this time. They are not moving.
Frank Leist, Jasper GA
![]()
11/14/2022You have to dig deeper than four inches the anchors do not run down nicely they want to snap before you even have them tightened all the way down it states to Mark a hole there is no way to Mark a hole with a marker prior to installing it made it very tough to install 84 of these wouldn't recommend
Nick Clemmons , North Platte NE
![]()
11/4/2022I own an import repair shop, and most of our cars are very low clearance. These worked perfectly for even our sleekest cars. No more dragging the nose off when the clients pull up completely. Strongly recommend. Customer service is great as well. One of our packages got lost with UPS, but they had it tracked down in no time.
Thomas Hull, Sarasota FL
![]()
8/7/2021Great delivery next day and great product. Can’t ask for more! They have their act together! Impressive!
Lynn Akers, Livingston TX
![]()
7/14/2021I bough 2 for my garage. I have another one for an outside parking spot. These work really good and with the light use I give them they stay in place without using the hardware to secure them in the floor. Great product and great supplier!
William Jones, Seneca SC
![]()
6/13/2021Easy to install. After marking the spots to drill, drill a 1/4 hole - then to enlarge the hole use a 1/2" drill bit and finally enlarge that hole with a 3/4' drill bit. Insert the 3/4" sleve and the rest is easy.
Dave Denyes, Grand Rapids MI
![]()
3/26/2021The were super easy to install and they brought structure along with organization to our parking lot
Jeremy Tinker, Cullman AL
![]()
3/15/2021Shipping was fast product made well just what I wanted.
Wade Bridenstine, Carey OH
